3.3. DELETING FINGERPRINT (DL)
- Enter to administration menu.
- Touch to “button #2" till “DL” appears and touch to “button #1" when “DL” is on display. ”01"
will be shown.
- Touch to “button #1" till you see the fingerprint id you want to delete and touch to “button
#2" when related id is on display.
- “OK” will be displayed and related fingerprint will be deleted.
NOTE 1:
System assigns an id to fingers and this id is shown when finger is read.
NOTE 2:
If you pass desired id by mistake, wait a few seconds till display goes o and restart.
3.4. DELETING ALL FINGERPRINTS (CL)
- Enter to administration menu.
- Touch to “button #2" till “CL” appears and touch to “button #1" when “CL” is on display. ”01"
will be shown.
- Touch to “button #1" till you see “17" and touch to “button #2".
- “OK” will be displayed and all fingerprints will be deleted.
NOTE:
If you pass “17" by mistake, don’t touch any button and wait a few seconds till display goes
o . After that restart the procedure.
3.5. ADJUSTING NUMBER OF TURNS (TC)
As default, system is adjusted to 3 stage locks. If stage of the lock is di erent, close the door
and follow procedure below:
- Enter to administration menu.
- Touch to “button #2" till “TC” appears and touch to “button #1" when “TC” is on display. ”AT"
will be shown.
- Touch to “button #2". “OK” will be displayed and cylinder will automatically lock and unlock
the door to learn number of needed turns to lock and unlock.
3.6. ADJUSTING DIRECTION OF LOCKING / UNLOCKING (MW)
Direction of rotation needs to be set according to door’s opening way as follows:
- Enter to administration menu.
- Touch to “button #2" till “MW” appears and touch to “button #1" when “MW” is on display.
”MR” or “ML” will be shown.
- Touch to “button #1" to toggle between “MR” - right door and “ML” - left door. When desired
way is displayed, touch to “button #2".
- “OK” will be displayed and direction of locking/unlocking will be set.
8
