2
2
5
WIRELESS
MOTORIZED CYLINDER
1. INSTALLATION
1.1. Motorized Cylinder
Utopic cylinders have the same installation process of the ordinary cylinder.
Remove
existing
cylinder
That’s
all !
Install
utopic
cylinder
and
tighten
screw
Set Screw
31 mm
35 mm
47 mm
31 mm
Adjusting Cylinder Length of Utopic S
Utopic S’s cylinder length is 66 mm and its inner part can
be extended by 12 mm. Thanks to this feature:
- Utopic S can fit to the doors with different thicknesses.
- It supports seperated installation, means firstly you can
install cylinder part and than you can install the
motorized part. For security doors that kind of
installation is suggested.
To seperate motorized part from cylinder, loosen the set
screw and take the motorized part apart. In this way, you
can install cylinder of Utopic and make adjustments on
the door if needed. Than you can assamble motorized
part to the cylinder easily by tightening the set screw.
!
Insert motorized part into cylinder while you are rotating it. The rotating shaft of device should fit
into its bearings in cylinder. Before tightening the set screw, make sure utopic controls the lock.
Cylinder
Knob
Knob Screw
