DESCO ASIA
© 2019 DESCO INDUSTRIES INC
TB-9096 Page 3 of 8
Employee Owned
4. Specifications:
List of Specifications:
Model No.
966-II Air Ionizer
Ionization Type
High frequency AC corona ionization type
Power-supply voltage
24 V DC ± 10%
Capacity
2.4VA
High voltage output
2,500V approx.
（
3pF,100M
Ω）
Required Air
Air (dried clean air)
Air pressure range
0.05 to 0.60 MPa
*1
Supplied air flow
40 to 220
ℓ
/min
Dimensions: (mm)
86.5L x 18W x 50H (Main Unit only)
Weight
78 g approx. (Main Unit only)
Environment
Indoor, Altitude up to 2000m
Ambient temperature
0 to 40°C
Ambient humidity
65% or less (No condensation allowed)
High voltage abnormality
(ALARM) Output
NPN and photo relay output
Maximum allowed current: 100 mA
Applied voltage: 30 V DC or less
Cleaning check
(C.C) output
NPN and photo relay output
Maximum allowed current: 100 mA
Applied voltage: 30 V DC or less
Discharge stop signal
(HV-OFF) input
Discharge OFF: Short-circuited to 0V
Discharge ON: Open
(Residual voltage : 0.5V or less)
Ozone
0.05 ppm or less(Measured Distance 300mm)
Ion balance
±
15 V or less
Material
Enclosure: ABS, Cover: Stainless, Discharge
needle: Tungsten
Accessories
Instruction manual, Power supply and signal cable,
Caution label (English)
*2
*1. The applicable pressure range depends on the nozzle to be used. Check the table below.
*2. Use as necessary
Range of air pressure (gauge pressure) when combining 966-II and the following nozzles are as below:
966S
0.05 to 0.60MPa
966T
0.05 to 0.50MPa
5. Installation and Wiring:
Warning
・
Be sure to turn OFF the power and air before installing the product.
Caution
・
This product cannot be used by itself. Be sure to choose one of the optional nozzles when using this product.
・
For optimum performance, be sure to use clean, dry air. Dirty air will cause the electrodes to deteriorate.
・
Always check this manual to ensure that the product wiring is done correctly. Errors in wiring could lead to problems or
abnormal operation of the product.
