DESCO ASIA
© 2019 DESCO INDUSTRIES INC
TB-9096 Page 4 of 8
Employee Owned
・
There is a protective tube on the emitter. Be sure to remove it
before attaching the optional nozzle.
・
Prior to installation of the product, be aware of potential
contamination by oil or water, and check for high temperatures
or high humidity. Avoid a place subject to dew condensation.
・
This product emits ozone into the atmosphere. Do not use this
product in an enclosed space.
・
Equipment used around the product should have ozone-
prevention measures. In addition, check regularly that nearby
equipment will not be affected by exposure to ozone.
Installation:
・
Install it at a designated place by using fixing holes (3 -
φ
3.4). The 966-II does not work well in a vertical
position. Please always mount it horizontal or pointing down.
・
Tightening torque on housing to the main body should be 20 N
･
cm or less.
Wiring:
・
Attach wire to power supply and signal cable as follows:
Color
Signal Name
I/O
Description
Red
DC+24V
--
Power 24V
Black
0V
--
Power supply 0V
Yellow
ALARM-NC
Output
The signal is turned off when error happens. (NC)
White
ALARM-NO
Output
The signal is turned on when error happens. (NO)
Green
C.C-NO
Output
The signal is turned on, lights up when a dirt or wear of
the discharge needle is detected. (NO)
Brown
HV-OFF
Input
When the signal is short circuited to 0V, discharge stops.
I/O Circuit Diagram:
