background image

3

103669

SAFETY

INFORMATION

Continued

 

WARNING ICON

G 001

 WARNINGS 

Continued

WARNING: 

Any change to this fireplace or its controls can be dangerous.

1. This appliance is only for use with the type of gas indicated on the rating plate. This

appliance is not convertible for use with other gases.

2. Do not place propane/LP supply tank(s) inside any structure. Locate propane/LP

supply tank(s) outdoors.

3. If you smell gas

• shut off gas supply
• do not try to light any appliance
• do not touch any electrical switch; do not use any phone in your building
• immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions

• if you cannot reach your gas supplier, call the fire department

4. This fireplace shall not be installed in a bathroom.
5. Never install the fireplace

• in a recreational vehicle.
• where curtains, furniture, clothing, or other flammable objects are less than 36

inches from the front, top, or sides of the fireplace.

• as a fireplace insert.
• in high traffic areas.
• in windy or drafty areas.

6. Do not use this fireplace as a wood-burning fireplace. Use only the logs provided with

the fireplace.

7. Do not add extra logs or ornaments such as pine cones, vermiculite, or rock wool.

Using these added items can cause sooting. Do not add lava rock around base. Rock
and debris could fall into the control area of fireplace.

8. You must operate this fireplace with the fireplace screen in place. Make sure fireplace

screen is in place before running fireplace.

9. This fireplace is designed to be smokeless. If logs ever appear to smoke, turn off

fireplace and call a qualified service person. Note: During initial operation, slight
smoking could occur due to log curing and fireplace burning manufacturing residues.

10. Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner

flame patterns. Ceiling fans can create drafts that alter burner flame patterns. Altered
burner patterns can cause sooting.

11. This fireplace needs fresh air ventilation to run properly. This fireplace has an oxygen

depletion sensor (ODS) pilot light safety system. The ODS shuts down the fireplace if
not enough fresh air is available. See Air for Combustion and Ventilation, pages 6
through 9. If fireplace keeps shutting off, see Troubleshooting, pages 24 through 27.

12. Do not run fireplace

• where flammable liquids or vapors are used or stored.
• under dusty conditions.

13. Do not use this fireplace to cook food or burn paper or other objects.
14. Never place any objects in the fireplace or on logs.
15. Fireplace front and screen becomes very hot when running fireplace. Keep children

and adults away from hot surfaces to avoid burns or clothing ignition. Fireplace will
remain hot for a time after shut-down. Allow surfaces to cool before touching.

16. Carefully supervise young children when they are in same room with fireplace.
17. Do not use fireplace if any part has been under water. Immediately call a qualified

service technician to inspect the room fireplace and to replace any part of the control
system and any gas control which has been under water.

18. Turn off and unplug fireplace and let cool before servicing. Only a qualified service

person should service and repair fireplace.

19. Operating fireplace above elevations of 4,500 feet could cause pilot outage.
20. Do not use a blower insert, heat exchanger insert, or other accessory not approved for

use with this fireplace.

21. Do not operate fireplace if any log is broken. Do not operate fireplace if a log is

chipped (dime-sized or larger).

22. To prevent performance problems, do not use propane fuel tank of less than 100 lbs. capacity.

.

Summary of Contents for Vanguard VMH10TP

































Reviews: