www.desatech.com
117272-01F
8
INSTALLATION
Continued
HEARTH kIT ASSEMBLY AND
INSTALLATION
Kit Assembly - Dual-Flame Only
1. Determine which side gas line will be
coming into fireplace.
NOTICE: Triple-burner model HD
-
vTR24W comes preassembled
with gas inlet on right side of
burner pan. DO NOT attempt to re
-
position burner on triple-burner
models. If your fireplace supply
is on the left side, a longer 3/8"
flex line should be purchased
and routed behind burner pan
and away from flame area.
2. Using a hammer and screw driver, remove
knockout plug from side of pan that cor
-
responds to gas line (see Figure 6).
3. Unscrew burner inlet fitting from burner
manifold.
Burner Inlet
Fitting
Burner Inlet
Fitting
Screw
Front
Burner
Burner
Manifold
Nut
Burner Clamp
Burner Pan
(Front)
Burner Pan
(Front)
Knockout
Plugs
Gas Connection
Must Be On
Right Side For
Triple Burner
TRIPLE-BURNER
DUAL-FLAME
Burner
Manifold
Figure 6 - Installing Burner
Figure 7 - Connecting Gas to Appliance
Adapter
Fitting
Gas
Connector
Tube
Burner Pan
Assembly
(Facing Front
of Fireplace)
4. Place burner manifold in pan with thread
-
ed opening facing open knockout plug.
5. Using thread sealant (resistant to the ac
-
tion of propane/LP gas) on larger end of
fitting, screw burner inlet fitting through
hole and into burner manifold (see Figure
6). Tighten using a wrench.
6. Using burner clamp, screw, and nut pro
-
vided, assemble clamp to pan (“U” style
and triple burners only). This will hold
burner manifold in place.
7. If using optional GA9150A kit, follow in
-
structions included kit for installation and
operation.
Installation and Gas Connection
1. Place burner pan assembly in center of
fireplace floor. Make sure front of pan
faces forward.
2. Thread gas supply fitting to fireplace gas
supply pipe. Use thread sealant.
3. Install adapter fitting onto burner inlet fit
-
ting using thread sealant on male threads
of burner inlet fitting (see Figure 7). Adjust
to most convenient position.
4. Install gas connector tube to gas supply
fitting. Carefully shape tube to attach to
adapter fitting. Be careful not to cause
kinks in tube.
