www.desatech.com
117272-01F
4
LOCAL CODES
Install and use log set with care. Follow all local
codes. In the absence of local codes, use the lat
-
est edition of
The National Fuel Gas Code ANSI
Z223.1
/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Figure 1 - Product Identification
(Dual Burner Shown)
Hearth Kit Model
___________________
Serial Number
_____________________
Log Set Model
_____________________
Grate
Burner
Pan
Burner Manifold
Burner Inlet
Fitting
Burner Clamp
Grate Steps
OPTIONAL PRODUCT FEATURES
PRODUCT IDENTIFICATION
UNPACkING
CAUTION: Do not remove the
data plates from the burner pan.
The data plates contain impor
-
tant product information.
1. Remove logs, hearth kit, pan materials,
and hardware from carton.
2. Remove all protective packaging applied
to logs and base for shipment.
3. Check heater for any shipping damage.
If heater is damaged call DESA Heating,
LLC at 1-866-672-6040 for replacement
parts before returning to dealer.
ON/OFF SAFETY VALVE/PILOT kIT
AND PROPANE/LP CONVERSION
An optional valve/safety pilot kit with a piezo
ignitor is available for this appliance. This sys
-
tem requires no matches, batteries, or other
sources to light. You must use this optional
system for LP conversion. See
Accessories
,
page 19.
REMOTE CONTROL READY
(MILLIvOLT) SAFETy vALvE/
PILOT kIT
An optional millivolt valve/safety pilot kit with
a piezo ignitor is available for this appliance.
This system requires no matches, batteries,
or other sources to light. This system may
be connected to a wall switch or hand-held
wireless remote control. See
Accessories
,
page 19.
REMOTE CONTROL ACCESSORIES
There is an optional hand-held ON/OFF re
-
mote control that can be purchased separately
for this log set. You must use the millivolt
valve/safety pilot kit to use remote acces
-
sories with this appliance. See
Accessories
,
page 19.
A wall switch is also available for this appli
-
ance. You must use the millivolt valve/safety
pilot kit to use the wall switch with this appli
-
ance. See
Accessories
, page 19.
