![background image](http://html.mh-extra.com/html/desa/hdle2824nr/hdle2824nr_owners-operation-and-installation-manual_2485987018.webp)
www.desatech.com
119921-01F
18
INSTALLATION
Continued
CAUTION: After installa
-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With the heater set to HI, check
to see if flames contact any log. If
so, reposition logs according to
the log installation instructions
in this manual. Flames contact
-
ing logs will create soot.
1. Align two pins at rear of base with two
holes in bottom of back log (#1). Place
log on pins (see Figure 23).
2. Place left front log (log #2) over burner
tube as shown Figure 24. The front of log
#2 sits behind the ember bed burner.
3. Place right front log (#3) to right of and
behind ember bed burner on base as
shown in Figure 24.
Figure 23 - Installing Log #1
Log #1
Figure 24 - Installing Logs #2 and #3
Ember Bed
Burner
Log #2
Figure 25 - Installing Log #4
Log #4
Log #3
Log #3
Pin
Figure 26 - Installing Logs #5 and #6
Log #6
Log #5
Log #2
Log #3
4. Align hole in bottom of log #4 with pin on
base as shown in Figure 25. The end of
log #4 will rest on base behind log #3.
5. Align holes in bottom of left top log (#5)
with pins on top of left front log (#2). Place
log on pins (see Figure 26).
6. Align holes in bottom of right top log (#6)
with pins on top of right front log (#3).
Place log on pins (see Figure 26).
7. Add embers to front ember bed burner.
Gently remove embers from the bag us-
ing gloves or tweezers.
(This material is
a skin irritant. Gloves or tweezers are
recommended to prevent skin irrita
-
tion).
Separate pieces of ember material,
pull apart and place on surface of ember
bed burner as shown in Figure 27, page 19.
Do NOT overlap ember material. Only
edges will glow. Do NOT place ember
material in area of pilot or rear burner.
8. Add lava rock around base to heater if
desired. Do not place lava rock on logs
or burner.
Do NOT place lava rock on
or around front burner.
Burner
Tube
Log #4