![background image](http://html1.mh-extra.com/html/desa/ez18nr/ez18nr_owners-manual_2485860002.webp)
www.desatech.com
114668-01F
2
SAFETy
WARNING: Improper
installation, adjustment,
alteration, service or
maintenance can cause
injury or property dam-
age. Refer to this manual
for correct installation
and operational proce-
dures. For assistance or
additional information
consult a qualified in-
staller, service agency or
the gas supplier.
WARNING: This ap-
pliance is for installation
only in a solid-fuel burn-
ing masonry or UL127
factory-built fireplace or
in a listed ventless firebox
enclosure. It is design-cer-
tified for these installations
in accordance with ANSI
Z21.11.2. Exception: Do not
install this appliance in a
factory-built fireplace that
includes instructions stat-
ing it has not been tested
or should not be used with
unvented gas logs.
WARNING: This is an
unvented gas-fired heat-
er. It uses air (oxygen)
from the room in which
it is installed. Provisions
for adequate combustion
and ventilation air must
be provided. Refer to
Air
for Combustion and Ven-
tilation
section on page 6
of this manual.
This appliance may be in-
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
TAbLE OF CONTENTS
Safety .................................................................. 2
Product Identification
........................................... 5
Optional Remote Control Accessories ................. 5
Local Codes......................................................... 5
Unpacking............................................................ 5
Air For Combustion and Ventilation ..................... 6
Product Features ................................................. 6
Installation ........................................................... 8
Operation ........................................................... 19
Inspecting Burners............................................. 23
Cleaning and Maintenance ................................ 24
Troubleshooting ................................................. 25
Specifications
.................................................... 29
Wiring Diagram .................................................. 29
Parts .................................................................. 30
Replacement Parts ............................................ 33
Service Hints ..................................................... 33
Technical Service............................................... 33
Accessories ....................................................... 34
Warranty ..............................................Back Cover