![background image](http://html1.mh-extra.com/html/desa/cge3924nr/cge3924nr_owners-operation-and-installation-manual_2485768023.webp)
www.desatech.com
119638-01C
3
OPERATION
Continued
Auto (Thermostatic) Mode
1. Press the POWER and LOCK buttons
together.to.turn.on.the.hand-held.remote.
control.
.. Press.AUTO.button.to.select.this.mode.
3.. Set. the. desired. room. temperature. by.
pressing.the.TEMP.+.or.-.buttons.
4. Press the POWER and LOCK buttons
together to turn off the fireplace
Note: Do not leave the hand-held remote in
the AUTO mode close to the fireplace. The
radiant heat from the fireplace will turn off the
fireplace. Ideally, place the hand-held remote
in the center of the room facing towards the
fireplace.
Note: Do not hold the hand-held remote for
a long time. Body temperature will affect its
operation in the AUTO mode.
Safety Features
When away from home for an extended period
of.time.or.as.a.child.safety.feature.to.prevent.
accidental ignition of the fireplace, the receiver
ON/OFF/REMOTE switch should be in the
OFF.position.
Auto Shutoff Feature
1.. If.the.average.room.temperature.reaches.
a range of 82° F (28° C) to 92° F (33° C),
the hand-held remote control will perform
a safety override and shut the fireplace off.
This.feature.is.not.available.in.the.MANU.
mode.
Figure 32 - Setting the Selector Switch,
Control Knob and Flame Adjustment
Knob for Remote Operation
Selector Switch in Remote Position
Control Knob in
On.Position.
Flame Adjustment
Knob
HAND-HELD
REMOTE OPERATION
NOTICE: you must light the pilot
before using the hand-held re-
mote control unit. See
Lighting
Instructions
on page 21.
After lighting, let pilot flame burn for about
one. minute.. Turn. control. knob. to. ON.
position. Adjust flame adjustment knob
anywhere between HI and LO. Slide the
selector switch to the REMOTE position
(see.Figure.3).
Note: The burner may light if hand-held re-
mote was on when selector switch was last
turned off. You can now turn the burner on and
off with the hand-held remote control unit.
IMPORTANT
: Do not leave the selector switch
in the REMOTE or ON position when the pilot
is not lit. This will drain the battery.
Figure 33 - Thermostat Hand-Held
Remote Control Unit (HRC200)
Locks.
System.to.
Prevent.
Accidental.
Ignition
LOCK
MANU
AUTO
ºC/ºF
TEMP
POWER
ROOM
TEMP
SET
TEMP
AUTO
Turns.Hand-
Held.Remote.
On.or.Off.and.
Allows You
to.Choose.
the.Manual.
Setting
Selects.AUTO.
Mode
°C/°F.Mode.Button
Turns.
Burners.
On.or.Off
Increases.or.Decreases.
Room.Temperature.in.
AUTO.Mode
Digital.
Display.
Shows
Temperature.
and.Settings
Indicator.
Light
THERMOSTAT SERIES MODEL
HRC200 (Included with this Unit)
The.hand-held.remote.can.be.operated.using.
either.the.manual.mode.(MANU).or.thermo-
static.mode.(AUTO).(see.Figure.33)..To.select.
Fahrenheit/Centigrade mode display, carefully
press the ˚C/˚F mode button with the end of a
paper clip or similar blunt object.
Manual Mode
1. Press the POWER and LOCK buttons
together. to. turn. on. the. hand-held. remote.
control.
.. Press. the. MANU. button. to. turn. on. the.
fireplace.
3. Press the POWER and LOCK buttons
together to turn off the fireplace.