![background image](http://html1.mh-extra.com/html/desa/cge3924nr/cge3924nr_owners-operation-and-installation-manual_2485768020.webp)
www.desatech.com
119638-01C
0
Ember.
Material
Ember.
Bed.
Burner
Ports
Ember.
Material
INSTALLATION
Continued
Figure 29 - Placement of Embers
Rear.Burner
Pilot.Location
Figure 26 - Installing Log #4
Log.#4
Pin
Log.#3
5.. Align.holes.in.bottom.of.top.right.log.(#5).
with pins on top of right front log (#2) and
back. log. (#1).. Place. log. on. pins. (see.
Figure.7).
6.. Add. embers. to. front. ember. bed. burner..
Gently.remove.embers.from.the.bag.us-
ing gloves or tweezers.
(This material is
a skin irritant. Gloves or tweezers are
recommended to prevent skin irrita-
tion).
Separate pieces of ember material,
pull.apart.and.place.on.surface.of.ember.
bed burner as shown in Figure 28, page 19.
Do NOT overlap ember material. Only
edges will glow. Do NOT place ember
material in area of pilot or rear burner.
7.. Add.lava.rock.around.base.to.heater.if.
desired..Do.not.place.lava.rock.on.logs.
or.burner..
Do NOT place lava rock on
or around front burner.
Figure 27 - Installing Log #5
Log.#5
Pins
Log.#1
Log.#
WARNING: Do not operate
unit without ember material
correctly in place as shown in
Figure 29. Do not overlap ember
material. Do NOT place ember
material anywhere else on the
unit. Use only ember material
supplied with unit. Excessive
or incorrectly placed ember
material may produce carbon
monoxide or soot.
WARNING: Do not use rock
wool or any other ember material
not supplied with this unit.
Figure 28 - Placement of Logs
Log.#4
Log.#1
Log.#5
Log.#3
Log.#