background image

www.desatech.com

120069-01A

10

7.  Remove spring clip. Hold socket and pull out 

old bulb.

8.  Hold socket and push in new bulb  (DO NOT 

exceed wattage).  Replace spring clip.

9.  Repeat steps 5 and 6 on page 9 for second 

bulb.

10.  Insert bottom edge of removed cylinder half 

into bottom drum track. Squeeze drum cylin

-

der until it's top edge fits into top drum rack.

11.  With gloves, carefully replace glass. Slide top 

of glass into metal slot and slide bottom onto 

ledge.

12.  Place  brackets  against  glass  and  tighten 

screws.

13.  Gently push ember bed down until rear edge 

is resting against rear ledge of unit.

14.  Replace front glass

.

Backlighting Bulbs

1.  Remove front glass.

2.  Remove spring clips. Note: Bulbs located on 

underside of top. Hold socket and pull out old 

bulb.

3.  Hold socket and push in new bulb.

4.  Replace spring clip on bulb

5.  Replace front glass.

TEChNICAL SERvICE

You may have further questions about installation, 

operation or troubleshooting. If so, contact DESA 

Heating Products’ Technical Service Department 

at 1-866-672-6040. When calling please have your 

model and serial numbers of your heater ready.

You can also visit DESA Heating Products’ techni

-

cal services web site at 

www.desatech.com

.

CLEANINg AND 

MAINTENANCE

Continued

REPLACEMENT PARTS

Note:

 Use only original replacement parts. This 

will protect your warranty  coverage for parts 

replaced under warranty. 

pARTS UNDER WARRANTy

Contact authorized  dealers  of  this product. If 

they can’t supply original replacement part(s), 

call DESA Heating Products’ Technical Service 

Department at 1-866-672-6040.

When  calling  DESA  Heating  Products,  have 

ready

•  your name

•  your address

•  model and serial numbers of your heater 

•  how heater was malfunctioning

•  purchase date

Usually, we will ask you to return the part to the 

factory.

pARTS NOT UNDER WARRANTy

Contact authorized dealers of this product. If they 

can’t supply original replacement part(s), call 

DESA Heating Products at 1-866-672-6040 for 

referral information.

When  calling  DESA  Heating  Products,  have 

ready

•  model number of your heater 

•  the replacement part number

ACCESSORY

FIREpLACE FRONT TRIM

BNFT - Brushed Nickel
BFT - Black

Summary of Contents for CEF26-2

















Reviews: