DERNASEER TF 220s, Manual

Page: 41 / 75

The TF220S may only be operated and maintained by authorised and
trained personnel who have fully read and understood this operators manual.
Attention should be paid to the following points prior to carrying out
1. NEVER WORK ALONE
minimum of two (2) persons should be present at all
2. Wear the appropriate Personal Protective Equipment as required by job conditions.
Do not wear jewellery or loose clothing that can catch on controls or moving parts.
Long hair must be contained with hairnet.
3. Maintenance or Servicing must
4. Remove only guards or covers that provide access. Wipe away excess grease and
oil.
5. Securely support any machine part that must be raised for maintenance.
.
6. When working at heights above (2m) always use an approved (EN/ANSI) safety
harness. Always use walkways and platforms provided or a safe secure platform
approved by the machine operators management. Do not use any unauthorised or
unsafe platforms.
7. Hydraulics. Return controls to neutral position and relieve all pressure in the
hydraulic system, before attempting to disconnect any hydraulic circuit or component.
8.Checking for hydraulic leaks. Beware hydraulic fluid under pressure can penetrate
the skin or damage eyes. Fluid leaks under pressure may not be visible. Use a piece
of cardboard to find leaks but do not use bare hand.
LOCK OUT EQUIPMENT BEFORE SERVICING.
TF220s
40
MAINTENANCE
may only be operated and maintained by authorised and
trained personnel who have fully read and understood this operators manual.
Attention should be paid to the following points prior to carrying out
maintenance.
NEVER WORK ALONE When maintenance or service is being carried out a
minimum of two (2) persons should be present at all times..
Wear the appropriate Personal Protective Equipment as required by job conditions.
Do not wear jewellery or loose clothing that can catch on controls or moving parts.
Long hair must be contained with hairnet.
Maintenance or Servicing must never be carried out whilst the machine is running.
Remove only guards or covers that provide access. Wipe away excess grease and
Securely support any machine part that must be raised for maintenance.
When working at heights above (2m) always use an approved (EN/ANSI) safety
harness. Always use walkways and platforms provided or a safe secure platform
approved by the machine operators management. Do not use any unauthorised or
Return controls to neutral position and relieve all pressure in the
hydraulic system, before attempting to disconnect any hydraulic circuit or component.
Checking for hydraulic leaks. Beware hydraulic fluid under pressure can penetrate
n or damage eyes. Fluid leaks under pressure may not be visible. Use a piece
of cardboard to find leaks but do not use bare hand.
LOCK OUT EQUIPMENT BEFORE SERVICING.
TF220s
may only be operated and maintained by authorised and
trained personnel who have fully read and understood this operators manual.
Attention should be paid to the following points prior to carrying out
When maintenance or service is being carried out a
Wear the appropriate Personal Protective Equipment as required by job conditions.
Do not wear jewellery or loose clothing that can catch on controls or moving parts.
be carried out whilst the machine is running.
Remove only guards or covers that provide access. Wipe away excess grease and
Securely support any machine part that must be raised for maintenance.
When working at heights above (2m) always use an approved (EN/ANSI) safety
harness. Always use walkways and platforms provided or a safe secure platform
approved by the machine operators management. Do not use any unauthorised or
Return controls to neutral position and relieve all pressure in the
hydraulic system, before attempting to disconnect any hydraulic circuit or component.
Checking for hydraulic leaks. Beware hydraulic fluid under pressure can penetrate
n or damage eyes. Fluid leaks under pressure may not be visible. Use a piece
LOCK OUT EQUIPMENT BEFORE SERVICING.