DERNASEER TF 220s, Manual

Page: 32 / 75

TF220s
31
OPERATING MACHINE
Start Up
Before feeding material into the TF220s , the entire machine must be running.
Starting Engine
The Engine must be started to
provide hydraulic power to all
functions.
Before Starting:
(i) Check the Engine oil level
and the Fuel level and top up if
necessary.
(ii) Adjust throttle lever (A) to
approximately halfway.
(iii) Turn the ignition key to the
“ON” position.(B)
The following warning lights on
the control panel will illuminate.
(1) A Red light (C) Oil Pressure
(2) A Red light (D) Alternator
Now turn the key to start
position (E) the engine will crank
and start after the warning
beeper has sounded for
approximately 7 seconds.
All the lights should extinguish
after start-up ) . If any of the lights
remain illuminated during
operation, there is a fault
relevant to that indicator.
A
B
E
C
D