Se�ngs
18
Derksen Lich�echnik
•
Switch on the projector.
5.2 Aligning the projector head
1.
Remove the device cover. (See 4.3)
2.
Release the hex bolt on the rota�ng axis with the ring
spanner supplied.
3.
Turn the projector head to the desired posi�on.
4.
Re-�ghten the hex bolt on the axis.
5.3 360° rota�on of the projector head
The projector head axis has a mechanical stop to prevent
damage to the cable. You can move this stop to reach any
possible rota�onal posi�on:
1.
Release the hex bolt on the axis.
2.
Turn the projector head to the ver�cal posi�on shown
here and do not move it again un�l the stop is firmly
in place once again
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.