Se�ngs
En
gl
is
h
PHOS 15 LT
27 / 48
•
Switch on the projector
5.3. Aligning the projector head
1.
Loosen the countersunk screw.
2.
Tilt the projector head into the desired posi�on.
(Note:
There is a mechanical stop to limit the projector head’s
rota�on and prevent damage to the cable. Do not �lt
or rotate the projector head without previously loosen-
ing the countersunk screw.)
3.
Tighten the countersunk screw.
5.4. Adjus�ng the focus of the mo�f
1.
Loosen the knurled screw.
2.
Reposi�on the projec�on lens within the case un�l the
mo�f is in focus.
3.
Tighten the knurled screw.
5.2. Aligning the projector
•
Turn the projector into the desired posi�on.
(Note: There is a mechanical stop to limit the rota�on of
the device stand and prevent damage to the cable.)
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
