DEPURECO DF 22, Instruction And Maintenance Manual

Page: 20 / 81

Page 21 of 43
3.3 Installation
Caution!
Before installing the vacuum, it is important to carry out a thorough
preventive visual inspection to identify any damage which may have occurred
during transport.
In the event of one or more components being damaged, do not continue with installation, inform
DEPURECO about the anomaly and agree upon action to be taken.
The vacuum cleaner is already fitted with an appropriate filter intended exclusively to vacuum dry dust
or debris
- Insert the hose equipped with a sleeve in the special suction inlet (Detail Nr.3, Chapter 1.2) and
make sure it is correctly tightened
- insert the desired accessory according to the type of extraction on the opposite side of the hose
Note: the flexible tube and the relevant end-pieces and accessories are not included with the
STANDARD model. Contact your dealer (or DEPURECO) for information regarding the various types of
OPTIONALS that can be used on this specific model.
The following operation must be carried out by a qualified electrician.
Ensure that the power supply line corresponds to the voltage and frequency indicated on the
identification plate and that it is efficiently earthed. The vacuum cleaner’s electrical current supply
socket must be protected by a CE-marked circuit breaker.
Insert the plug (standard supply) into the socket.
Warning!
Do not insert the plug in the power supply socket with wet hands.
Do not use extension leads.