DEPURECO DF 22, Instruction And Maintenance Manual

Page: 23 / 81

Page 24 of 43
4.2
Operating cycle
Ensure that the power cord is intact and in perfect state.
Warning!
Before inserting the plug, ensure that the voltage of the power supply line
corresponds to the one indicated on the vacuum's identification plate.
- Make sure the plug is correctly inserted into the socket
- Make sure the hose is properly inserted and locked in the suction inlet (Detail N° 3, Section 1.2).
- Make sure the bin (Detail N°4, Chapter 1.2) is located and blocked under the chamber of the
vacuum cleaner (Detail N°2, Section 1.2).
- Secure the vacuum cleaner using the lever on the swivel caster, as shown in the figure.
Warning!
Do not move the vacuum cleaner while it’s working
Hold the end of the hose with the chosen vacuum accessory.
Version with manual filter shaker
To start the machine, rotate the main switch ( 1 ) to “ I ” and start the vacuuming. To stop the machine
rotate the main switch ( 1 ) to “ 0 ”
Warning!
If dust comes out of the vacuum’s head the filter may be broken.
In this case it’s necessary to immediately stop the machine and verify the cause.