18
Assembly:
Use the DEPRAG Grease 807293 (100-g tube) to grease the
ball bearing, needle bearing and gearing parts prior to
reassembly.
a. Clean rotor.
b. Press the ball bearings into the two bearing covers.
c. Press the shaft-side bearing cover with the ball bearing on the rotor.
d. Insert the new vanes into the rotor.
e. Put the rotor cylinder over the rotor.
After assembly the bearing covers shouldn’t have any axial
gap. The rotor must turn freely.
f. Press air-connecting side bearing cover with the ball bearing on the
rotor.
For remaining assembly proceed logically in reverse order with reference to
disassembly!
5.1. Service Tools (Optional Equipment)
N
AME
P
ART
N
O
.
Fixing device (for rotor cylinder)
461501
Arbor (to disassemble bearing cover with grooved rotary joint)
462329
Plier (for threaded fitting 326497)
461289
Hook (for threaded fitting 326497)
323688
Chucking jaws (to clamp motor housing)
461500
Fixture (for motor housing)
462942
Spanner AF 8 (for slide connector 821431)
800399
Spanner AF 17 (for valve housing 374047)
800405
Allen key AF 6
(to push out the motor- and gearing package)
800449
Pressure pin
460778
