background image

  

37 

ITALY 

ATAX S.r.l. 

Via Carolina Romani, 23 
I-20091 Bresso/Mi 
Tel.: 0039 02/ 61.03.48.61 
Fax: 0039 02/ 61.03.48.60 
e-mail: [email protected] 
Internet: www.atax.it

 

 

JAPAN 

NIPPON GESCO Ltd. 

825-1 Karima, Tsukuba-City 
Ibaraki-Pref. 305-0822 
Japan 
Tel.: +81 (29) 855-3976 
Fax: +81 (29) 828-5578 
e-mail: [email protected] 

 

JORDAN 

EP-Technology Trading S.U.A.R.L. 

29 Rue Ahmed Tlili - ZI Borj Cedria 
TN-2055 Bir el Bey Tunis - Tunisia 
Tel.:  +216/ 79 / 412.889 
Fax:  +216/ 79 / 412.966 
e-mail: [email protected] 
www.ep-technologie.com 

 

KOREA (South)

 

Handtools 

DONG WON POWER-TECH.INC.

 

108-10 Moonjung-Dong 
Songpa-Ku 
Seoul, Korea 
Tel.: +82 (0) 2 / 409.1344 
Fax: +82 (0) 2 / 409.1345 
e-mail: [email protected] 

 

Screwdriving / Assembly Technology  

Fatec Co.Ltd.

 

#717 LG Palace B/D 
165-8 Dongkyo-dong 
Mapo-gu Seoul, 
Korea 
Tel.: +82 (0) 2 / 2 688.2152 
Fax: +82 (0) 2 / 2 688.2893  
Internet: www.fatec.co.kr  
e-mail: [email protected] 

 

LITHUANIA 

HIDROTEKA 

Engineering Services 
Chemijos 29E 
LT- 51333 Kaunas 
Tel.: 00370 / 37 / 452.969 
Fax: 00370 / 37 / 760.500 
Internet: http://www.hidroteka.lt 
e-mail: [email protected] 

 

LUXEMBOURG

 

AWP

 

Parelhoenstraat 24 
9080 Lochristi 
BELGIUM 
Tel.: +32 9232 0678 
Mobil: +32 473 345907 
Fax: +32 9342 0678 
Internet: http://www.awp-p.com 
e-mail: [email protected] 

 

MALAYSIA

 

FI INNOVATION RESOURCES SDN.BHD

 

175, MK D Jalan Bahru 
11000 Balik Pulau, Penang 
MALAYSIA 
Tel.: +60 13 449 0386 
Fax: +60 4 866 9560 
e-mail: [email protected] 
e-mail: [email protected] 
Internet: www.geocities.com/farsberg

 

MOROCCO 

EP-Technology Trading S.U.A.R.L. 

29 Rue Ahmed Tlili - ZI Borj Cedria 
TN-2055 Bir el Bey Tunis - Tunisia 
Tel.:  +216/ 79 / 412.889 
Fax:  +216/ 79 / 412.966 
e-mail[email protected] 
www.ep-technologie.com 

 

NETHERLANDS 

Zumpolle B.V. 

Postbus 29 
NL-5306 ZG 
Brakel/Niederlande 
Tel.: +31 (0) 4 18 / 67 18 16 
Fax: +31 (0) 4 18 / 67 32 17 
Internet: http://www.zumpolle.net 
e-mail[email protected] 

 

NORWAY 

Deprag Scandinavia AB 

Gap Sundins väg 3 
SE-63346 Eskilstuna 
Universal Import 
Tel.: +47 (0) 2 / 2681.530 
Fax: +47 (0) 2 / 2199.127 

 

POLAND 

INTEGRATOR - RHC 

ul. Wielki Rów 40 B 
87-100 Torun 
Tel. +48 / 56 66 93 841 
Fax +48 / 56 66 93 805 
Internet: www.integrator-rhc.pl 
e-mail[email protected] 
e-mail: marek.sobocinski@rhc. 

 

PORTUGAL 

IberoAir – Unipessoal, Lda. 

Mourisca do Vouga, Apartado 30 
3754-907 Trofa AGD 
Tel.: +351 (0) 234 / 690 080 
Fax: +351 (0) 218 / 647 214 
e-mail[email protected] 

 

SLOVENIA 

MB-NAKLO D.O.O. 

Toma Zupana 16 
SLO-4202 NAKLO 
Tel.: +386 (0) 4 / 277 17 00 
Fax: +386 (0) 4 / 277 17 17 
e-mail[email protected] 

 

SOUTH AFRICA 

Dowson & Dobson Industrial  

Shipping and courier deliveries: 

12 Wrench Road 
ISANDO 
1601 
Republic of South Africa 

Postal deliveries: 

P.O. Box 1162 
ISANDO  
1600 
Republic of South Africa 

 

Tel.: +27 11 392 2367 
Fax: +27 11 392 3573 
Internet: www.dowson.co.za 
e-mail[email protected] 

 

SPAIN 

ALCOTAN SISTEMAS S.A. 

p° de la Direccion, nmro. 95, local 
E-28039 Madrid 
Tel.: +34 91 / 311.17.84 + 311.18.01 
Fax: +34 91 / 311.60.53 
e-mail[email protected]

 

 

BARCELONA office: 

Passeig de la Mare de Déu del 
Coll, 122-124 
E-08023 Barcelona 
Tel.: +34 93 / 2 85 50 34 

 

SWEDEN 

DEPRAG Scandinavia AB 

Gap Sundins Väg 3 
S-633 46 Eskilstuna 
Tel.: +46 (0) 16-12 61 10 
Fax: +46 (0) 16-13 31 88 
Internet: http://www.deprag.se 
e-mail: [email protected] 

 

SWITZERLAND 

Axnum AG 

Solothurnstrasse 142 
2504 Biel-Bienne 
SWITZERLAND 
Tel.: +41 (0)32 343 3065 
Fax: +41 (0)32 343 3069 
Internet: http://www.axnum.ch  
e-mail: [email protected] 

 

TAIWAN 

I HEN MACHINE Co.Ltd. 

6F-9, No. 12, Lane 609, Sec. 5 
Chung-Hsin Road, 
San-Chung City 
241 Taipei Hsen 
Tel.: +886 (0) 2 / 2999.6766 
Fax: +886 (0) 2 / 2999.6236 

 

TUNISIA 

EP-Technology Trading S.U.A.R.L. 

29 Rue Ahmed Tlili - ZI Borj Cedria 
TN-2055 Bir el Bey Tunis - Tunisia 
Tel.:  +216/ 79 / 412.889 
Fax:  +216/ 79 / 412.966 
e-mail: [email protected] 
www.ep-technologie.com 

 

TURKEY 

MEKA LTD. STI.  

Tepecik Mah. Ziya Gokalp Cad. No:3 
P.K 41135 KOSEKOY – IZMIT - 
KOCAELI - TURKEY 
Tel.: 00 90 262 373 65 03 
Tel.: 00 90 262 373 65 04 
Fax: 00 90 262 373 65 05 
Internet: www.me-ka.com 
e-mail: [email protected] 

 

USA, MEXICO, CANADA 

DEPRAG INC. 

640 Hembry St. / P.O. Box 1554   
Lewisville, TX 75057-4726 
Tel.: +1 / 972 / 221 – 8731 
Fax: +1 / 972 / 221 – 8163 
Toll Free: (800) 4 DEPRAG 
Internet: http://www.deprag.com 
e-mail: [email protected] 

 

VENEZUELA 

Suministros Tecnicos SUMTEC C.A. 

Av. Francisco de Mirando, Centro Plaza 
Torre C, Piso 16, Officina C16 A-B 
Urb. Los Palos Grandes 
Caracas 1060 
Tel.: +58 (0) 212 – 28 56 41 0 
Fax.: +58 (0) 212 – 28 51 94 7

 

 

Summary of Contents for 374099 A









































Reviews: