Denzel 26915, User Manual, Page: 8 / 32

8
ANGLE GRINDER
EN
HANDLING INSTRUCTIONS
General view of the tool is shown on picture 1.
pic. 1
1. Gear housing.
2. Spindle lock button.
3. Engine housing.
4. Easy access to carbon brushes.
5. Lock key of main handle (for model AG-230-2600).
6. Power cable. 7. Power switch key.
8. Switch lock button.
9. Side handle.
10. Protective cover.
11. Protective cover fastening lever.
12. Tooling (not included).
Description
Angle grinding machine represents rotary action machine consisting of electric drive and angular gear,
on the output shaft of which the possibility of fixing the tooling is provided. The electric drive is the collector
AC motor, housed in a plastic case.
The machine is designed to work with grinding or cutting wheels, as well as a stripping tool (metal/ nylon
cup and disk brushes, petal grinding heads, etc.) with a working speed of at least 80 m/s.
The machine is equipped with a protective cover that protects the operator from sparks flying out of the treatment
area of wear products of equipment and injuries at destruction of equipment. Work without the use of a protective
casing is strictly prohibited for safety reasons.
OPERATION
ATTENTION!
Always unplug the power cord from the power supply before preparing for the operation,
setting up, and maintenance of the power tool.
Installing a protective cover
ATTENTION!
The disc guard must be installed on the instrument in this way so that the closed side of the cover
is always towards the operator.
9
7 8 4
3
2
1
11
12
10
5
6