circuit breaker o f the load
i i j j .
Circuit breaker o f the machine
(3) Set the throttle lever in "START / IDLING"
position and put the machine in cooling operation
for about 5 minutes.
(4) Set the starter switch in "STOP" position.
The engine will stop immediately,
(5) Remove the key from the starter
switch and keep it at hand.
(6) Check the panel light goes out.
(7) Check the amount o f fuel. Supply
additional fuel if necessary.
(8) Check for leakage o f oil, fuel and
water.
[No fe]
For emergency stop, keep pushing
the "EMERGENCY STOP" button
emergency stop
button
until the engine stops.
-
45
-
cooling operation for about 5 min.
throttle lever
starter switch
stop
5-4
Shut down
(1) Turn OFF the circuit breaker of the load.
(2) Turn OFF the circuit breaker o f the machine.
