EN7
Use and care of the remote control
Installing the battery
Slide the tray out on the back of the remote control and insert the battery with the (+) and minus (-) poles pointing
in the proper direction.
• When use for the first time, pull out the film protruding the tray.
CAUTIONS
• Remove the battery if the remote control is not used for a month or longer.
• Do not recharge, disassemble, heat or dispose the battery on fire.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control completely clean and install a new battery
• When disposing of used batteries, please comply with government regulations or environmental public
institution’s rule that apply in your country/area.
• Always check carefully that you are loading the battery with plus (+) and minus (-) poles facing the proper
directions.
Using the remote control
Point the remote control in the direction of the front panel to operate.
IMPORTANT
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator
pedal.
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press “ ” button to turn on unit. To turn off, press and hold the button again.
MAIN MENU
This is root of the screen hierarchy and you can simply access all features by tapping on the touch screen buttons.
Press
MODE
on the remote control to show the MAIN MENU.
Selecting a source (MODE)
Press
MODE
repeatedly to switch between TUNER, CD/DVD, AUX, USB or SD/MMC mode.
Adjusting Volume
• Head Unit: Rotate
VOL
knob right or left to increase or decrease volume.
• Remote Control: Press
VOL+ or VOL-
to increase or decrease volume.
Mute Button
• Head Unit: Press
MU
button to mute the sound at once. Press again to return to previous volume level.
• Remote Control: Press
button.
Loud Button (LD)
1. Press
EQ
on remote.
2. Press (
) to select Loudness.
3. Press (
/
on remote ) to turn feature ON/ OFF.
Tips:
You can also press and hold
LD button on remote control.
Equalizer (EQ)
1. Press
EQ
on remote.
2. With DSP Presets highlighted, press (
/
on remote ) to select the desired equalizer mode.
Tips:
You can also press
EQ once to enter EQ mode, then repeatedly press EQ button to select the desired EQ
mode.
CLOCK
To show clock, switch to
RADIO
mode and press CLK on remote control.
Tips: You can also tap any area on screen with no function key to show the clock.
