manualshive.com logo in svg

Dentsply Sirona Xios AE, Operating Instructions Manual

Share
Download
Dentsply Sirona Xios AE Operating Instructions Manual Download Page 30

4 Operation
4.2 Connect the sensor

Dentsply Sirona

Operating Instructions Xios AE Sensor USB interface and sensors

30

67 29 433 D3780

D3780.201.01.01.02    09.2019

4.2

Connect the sensor

4.2.1

Connect sensor and USB interface

To connect the sensor and the USB interface, please perform the
following steps:

1.

Connect the USB interface to the USB port of a PC either directly or
via a USB hub. When attached, the Connection status LED on the
USB interface displays a green indication.

2.

Connect the sensor to the USB interface. When attached, the
Sensor status LED on the USB interface also displays a green
indication.

4.3

Register the patient

To register a patient in Sidexis 4, please perform the following steps:

ü

Sidexis 4 is open and running.

1.

Click on the 

"Patient:" button in the phase bar.

2.

Click on the desired patient in the patient list.

3.

Click the 

"Register and exposure" button to prepare the software for

a new exposure.

Ä

Sidexis 4 software enters the Exposure phase.

4.

Select the Xios AE sensor in the device screen.

Summary of Contents for Xios AE



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands