manualshive.com logo in svg

Dentsply Sirona Xios AE, Operating Instructions Manual

Share
Download
Dentsply Sirona Xios AE Operating Instructions Manual Download Page 19

Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors

3 System description

3.2 USB interface

67 29 433 D3780
D3780.201.01.01.02    09.2019

19

3.2

USB interface

The AE Sensor USB interface is connected between the sensor and the
PC. Image data is transferred to a PC via the AE Sensor USB interface
and USB cable. The interface also provides important feedback on the
status of the imaging system through its LEDs.

3.3

USB cable

A special USB cable is supplied. It provides a USB 3.0 series “A”
connection (A) to the PC workstation and a USB 3.0 “micro-B”
connection (B) to the USB module. The USB cable conforms to USB 2.0
and USB 3.0 standards and is designed especially for use with Xios AE.

CAUTION

Standard commercial USB cables do not offer adequate protection
from electromagnetic interference.
➢ Only use the special USB cable supplied by Dentsply Sirona.

Summary of Contents for Xios AE



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands