6 Operation
6.3 Machining process
Dentsply Sirona
Operating Instructions CEREC Primemill
42
67 19 681 D3439
D3439.201.01.01.02 09.2019
6.3.3
Starting the machining processes
ü
The touch display of the production unit shows the HOME screen
and the device door is closed.
1.
The production unit positions the tools as soon as the door is
closed.
2.
If a data matrix code is present:
The Webcam is activated and you can scan in the data matrix code
of the block (see "").
or
➢ If no data matrix code is present:
You can manually enter manufacturer, type of material, size, color,
and enlargement factor of the block.
3.
Open the door.
4.
Place the selected block in the block fixing.
5.
Clamp the block with the ball pressure screw. Use the block clamp
tool for this purpose (see also “Manual block clamp [→ 44]”).
6.
Close the processing chamber door.
Ä
The expected duration of the machining process is displayed in
the touch display. The restoration number, date, ID number,
and username are also displayed.
NOTE
Error message during touch process!
Always be sure to insert the block that you selected for the
restoration. Otherwise an error message will be displayed during the
touch process.
NOTE
Ending the machining processes
You can terminate the machining process at any time by clicking the
"Stop" button on the PC or on the touch display.
