Denso QK20-R, User Manual

Page: 21 / 122

10
(6) Wait for the USB driver to be found and for the caution
message for driver's digital signature to appear, then click
Continue Anyway
to proceed.
(7) Wait for the completion screen to appear and then click
Finish
.
(8) To check whether the USB device is working normally, open
the Windows Device Manager.
If "
DENSO WAVE USB Device
" and "
DENSO WAVE
Active USB-COM Port (COMx) - Connected
" are added
to the tree as shown at left, the scanner is connected
normally.
If the device is not added or it is marked with or ,
remove this driver with the uninstaller, reboot your
computer, and perform the above connection process again.
Windows 7
(1) Connect the scanner's USB interface cable to the computer or USB hub.
(2) Wait for
Installing device driver software
to appear on the
Windows taskbar, and then open the status.