Denso DST-I, Instruction Manual

Page: 14 / 28

1 Before Use
- 6 -
Use a USB cable to connect this product to a PC.
Connecting to a PC
NOTE
The power supply of this product is turned ON by turning the mode switch ON after connected with a
PC.
When the USB communication with the PC is established, the PC communication (USB) indicator on
this product lights or flashes in green.
When establishing the connection with the Bluetooth communication function on the models with
Bluetooth, USB cable connection is not needed.
If connecting with a PC with the Bluetooth communication, communication setup must be performed
with the DST-i configuration tool.
When the Bluetooth communication with the PC is established, the PC communication (Bluetooth)
indicator on this product lights or flashes in blue.
When connecting the model with Bluetooth to a PC with the USB cable, the USB communication has
the top priority in the communication between a PC.
When communication way is changed from USB to Bluetooth while communicating, remove the USB
cable with the PC application software finished.
CAUTION
You must install the DST-i setup software on your PC before you connect the USB cable to your PC.
Reference: Page 4 Installing DST-i setup software to a PC (all models) (Chapter 1 Before Use/Setup/Necessary Setup)
When the PC does not supply adequate power, please contact your distributor.
T02006E
USB cable
Connected to the USB connector into the PC