Denso DST-I, Instruction Manual

Page: 12 / 28

1 Before Use
- 4 -
For using this product, following setup is needed.
Installing DST-i setup software to a PC (all models)
A dedicated USB driver, the setup utility (DST-i configuration tool), etc. which is required for connecting this
product and a PC using a USB cable or Bluetooth shall be installed to the PC.
Installing the DST-i main unit software to this product (all models)
Install the DST-i main unit software to this product.
Installing Bluetooth driver software and Paring to a PC (models with Bluetooth)
For the models with Bluetooth, to connect this product with a PC through the Bluetooth communication function,
you must install the Bluetooth driver software to the PC beforehand.
In addition, you must execute pairing between the PC and this product.
1.
Access the following website and setup the this product and the PC following the displayed
instructions.
http://www.ds3.denso.co.jp/dst-i/setup/
Necessary Setup
CAUTION
Do not connect this product with a PC using the USB cable before the DST-i setup software
installation to your PC is completed.
To install the DST-i setup software to a PC, log on with administrator privileges and close all running
applications before installation.
In installing the DST-i main unit software, execute the install by using the USB cable in the state that
this product and the PC are connected.
Do not execute the install in using Bluetooth communication.
Use of a Bluetooth driver software equipped as standard to the PC with Microsoft
®
Windows
®
operating system is recommended for use of a Bluetooth communication.
This information does not guarantee the connection between all of commercially available
Bluetooth modules and information terminals equipped with Bluetooth (e.g., PC and cellular
phone).
Use a Bluetooth module that is labeled with the Bluetooth logo mark and conforms to the Bluetooth
standard 2.0.
Total eight Bluetooth modules and information terminals having Bluetooth can execute paring with
this product. If ninth Bluetooth module or information terminal executes paring, first Bluetooth
module or information terminal will be cancelled.