Denso DST-I, Instruction Manual

Page: 13 / 28

1 Before Use
- 5 -
Use the datalink cable to connect this product with the vehicle.
Check the position of the diagnosis connector of the vehicle side in the repair manual of the vehicle.
1.
First, connect this product and the datalink cable.
2.
Next, connect the datalink cable to the vehicle side diagnosis connector.
1-4 Connection
Connecting to the vehicle
CAUTION
Perform the connection of step 1 and step 2 according to the order.
NOTE
The power supply of this product is turned ON by turning the mode switch ON after connected
with the vehicle.
[1] Connected to this product
Tighten with screws.
Notch (Center)
T02929E
[2] Connected to vehicle side diagnosis connector