Denso BHT-400-CE Reference Manual Download

Page: 298 / 347

- 292 -

18.29. CommSerial

Constructor

Constructor Name

Description

CommSerial

Creates a new instance of the CommSerial class.

Fields

Field Name

Description

DEFAULT_PORT

Default value for the COM port to be used

Properties

Property Name

Description

WaitEvent

Specifies a wait event.

SignaledEvent Acquires

the

event that has occurred.

InBufferCount

Size of data in the receive buffer

OutBufferCount

Size of data in the send buffer

PortOpen

Port number of the COM port to be used

Port

Open/close of a COM port

Params Communication

parameter

Methods

Method Name

Description

Input

Reads the contents of the receive buffer.

Output

Writes into the send buffer.

Dispose

Frees up all unmanaged resources.

Events

Event Name

Description

OnDone

Occurs when a communication event has occurred.

Enumeration

Enumeration Name

Description

EN_EVENT Event

type

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Search results

Summary of Contents for BHT-400-CE

Reviews:

Related manuals for BHT-400-CE

Brands by name

Popular brands

Denso BHT-400-CE, Reference Manual

Search results

Summary of Contents for BHT-400-CE

Reviews:

Related manuals for BHT-400-CE

Brands by name

Popular brands