Denso BHT-400-CE Reference Manual Download

Page: 301 / 347

- 295 -

WaitEvent

Sets or acquires the event to wait for.

￭

Syntax

[VB]

Public Property

WaitEvent

EN_EVENT

[C#]

public EN_EVENT

WaitEvent

{

get; set;

}

￭

Property

Event to wait for

Parameter values: As listed in EN_EVENT

Default value: EN_EVENT.NONE

￭

Exceptions

Name of Exception

Meaning

ObjectDisposedException COM has not been opened yet.
ArgumentException The

specified parameter value(s) lies outside the

permissible range.

￭

Note

The parameter value will always be EN_EVENT.NONE while the port is closed.

[Ex.] Set the BHT to wait for a receive event.

[VB] MyComm.WaitEvent = CommSerial.EN_EVENT.RECEIVE

[C#] MyComm.WaitEvent = CommSerial.EN_EVENT.RECEIVE;

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Search results

Summary of Contents for BHT-400-CE

Reviews:

Related manuals for BHT-400-CE

Brands by name

Popular brands

Denso BHT-400-CE, Reference Manual

Search results

Summary of Contents for BHT-400-CE

Reviews:

Related manuals for BHT-400-CE

Brands by name

Popular brands