How to install the Honeywell (formerly Metrologic) Voyager Scanner
This article covers the steps required to install the Voyager wand scanner for use with the Web
Kiosk or Point of Sale (POS) terminal within the ClubReady system
Requirements:
1. Admin rights on the computer you are installing the scanner on
2. An availible USB port on the computer or powered USB Hub.
3. Access to the notepad application on your computer to test the scanner after install.
Step 1 - Verifying you have the correct scanner
Please verify the scanner matched the information listed below. If anything does not match
these instructions will not work for installing your scanner. This may also mean ClubReady will
not support or only be able to provide limited support for your scanner.
Manufacturer: Honeywell (formerly Metrologic)
Model Name: Voyager
Model Number: MS9520
Part Number: MK9520-32A38
Once you have verified all of the information above is correct, please continue to the next step.
How to install the Honeywell (formerly Metrologic) Voyager Scanner - 1
