8 Installation of the optional DMP3A player
Optionally a high capacity DMP3A player can be connected to DH100ix as an external device.
button to select player.
DMP3A players for DH100ix head units are shi
ost:
Avoid installation place, which can be hot (close to the heating system or the engine)
and has no natural air ventilation.
ing spin-up. Proper grounding of the car
To use a DMP3A with DH100ix head unit, a version 3.xx firmware is required. If necessary, you can
download it from
www.dension.com
When DMP3A is installed, DMP3C can be used as before. Use
SOURCE
pped with a special Aluminium CarH
Hard disk drives require high current dur
host is essential to avoid such problems and to eliminate noise problems.
8.1Required DMP3A firmware version
or update your player with the DMP3 MANAGER.
LCD display of DMP3A is dimmed and shows DMP3 logo during car use. Also, buttons are
disabled to avoid accidental push. To activate party mode while the player is in the car host, press
and hold the button. After power off DMP3A will return to normal operation.
Fix CarHost at any convenient place in
the DH100ix
d bus cable.
d cable to the
nough free
e the player.
When you are ready, slide-in the
prepared DMP3A player to the CarHost.
the car, then connect to
head unit with the supplie
Fix the end of the groun
carhost (not supplied).
Make sure, that there is e
space to insert and remov
1 – grounding screw
t
2 – DH100ix bus cable socke
27
MAN_DH100ix_0200_EN
Summary of Contents for DH100ix
Page 2: ......
