7 Car installation
Before finally installing the unit, connect the wiring temporarily and make sure it is all
Use only the parts included with the unit to ensure proper installation. The use of
h the normal
ures, such as direct
uld be subjected to dust, dirt or excessive
he unit.
7
e front panel and the black plastic frame.
f the unit.
•
Insert the supplied keys into the slots at both sides, and slide the unit out of the dashboard
late.
7
(if not, a
converter will be necessary.
ing wiring connections, disconnect the power supply by removing the fuse from
th
•
Make other wiring connections as shown.
•
If your car does not have ISO connectors, you can procure it from any car accessory shop.
INCORRECT WIRING CONNECTION WILL CAUSE PERMANENT DAMAGE TO
UNIT.
connected up properly and the unit and system work properly.
unauthorized parts can cause malfunctions.
Consult with the nearest dealer if installation requires the drilling of holes or other
modification of the vehicle.
Choose the mounting location carefully so that the unit will not interfere wit
driving function of the driver.
Avoid installing the unit where it would be subjected to high temperat
sunlight or hot air from the heater, or where it wo
vibration.
Be sure to remove the front panel before installing t
.1 Unit removal
•
Remove the detachabl
•
Remove the metal strap attached to the back o
while holding the trim p
•
Remove the keys from the slots.
•
Disconnect all the wires of the unit and the antenna plug.
.2 Electrical connection
•
Make sure your car battery is a 12 volt (6 filler caps) negative ground system
•
Before start
e fuse box.
22
MAN_DH100ix_0200_EN
Summary of Contents for DH100ix
Page 2: ......
