6
15.
Pair LED:
This LED will illuminate when DN-410X is paired with a Bluetooth audio device.
16.
LED Meters:
Displays the audio signal level of the main outputs.
17.
Master Fader:
Adjusts the speaker’s
Main Out
volume, which includes the
Mic/Line
Inputs
,
Ext. In
, and the audio of a paired Bluetooth device.
18.
Stereo Aux Return:
Controls the signal level returning from the
Aux Inputs
.
19.
Phones/Monitor Knob:
Adjusts the signal level sent to the
Monitor Out
and the
Phones
Output
.
20.
Phones Output:
Connect headphones to this stereo 1/4” (6.35mm) output.
Rear Panel
8
6
5
4
3
1
2
9
7
10
12 12
13 13 13 13
13 13 13 13
14 14 14 14
11
1.
Power Input:
Insert the included power cable here.
2.
Fuse:
If the unit’s fuse is broken, lift this tab to replace the fuse. Replace it with a fuse
with an appropriate rating (printed under the unit’s power cable input). Using a fuse with
an incorrect rating can damage the unit and/or fuse.
3.
Voltage Selector:
Change this voltage selector setting only when necessary (e.g., when
traveling to a country or region with a different voltage). Selecting an improper voltage
setting can damage the unit.
4.
Power On/Off Switch:
Turns DN-410X’s power on or off.
5.
Phantom Power Switch:
Provides phantom power (+48V) for condenser microphones.
Phantom power is applied to the XLR
Mic Inputs
.
6.
Antenna:
Adjusts the reception of the signal that is being received from a Bluetooth
source such as a PC, Mac, iOS device, Android, etc.). DN-410X has a transmission range
up to 100 feet (30.5 meters).
7.
Main Out:
Use standard 1/4” (6.35mm) TRS cables to connect this output to the house
speaker, recorder, or amplifier system. Control the level of this output using the
Master
Fader
.
8.
Monitor Out:
Use standard 1/4” (6.35mm) TS cables to connect this output to your
monitor speaker or amplifier system. Control the level of this output using the
Phones/Monitor
knob.
9.
Aux Sends:
Two mono 1/4” (6.35mm) TRS auxiliary sends allow you to connect effects
that can be blended in with the source (or “dry”) signals. One typical example is to use
one aux send for a reverb unit and the other for a monitor mix for the musicians.
5.25”
(13.3cm)
19” (48.3 cm)