3
Features
Front Panel
1.
Power Button:
Press this button to turn the unit on or off. Make sure the
AC In
is properly
connected to a power outlet.
2.
BNC Antenna Terminal:
Connect the included
removable Bluetooth antenna
to this BNC
connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth
device. DN-300BR has a range of up to 100 feet (33 meters).
Note:
Make sure to attach only one antenna to either the front panel or rear panel Terminal at a
time. Using two antennae will negatively affect the performance of the Bluetooth receiver.
3.
Status Light:
This LED indicates the DN-300BR’s Bluetooth pairing status:
•
Flashing slowly
(approximately twice every 3 seconds)
:
DN-300BR is not paired to a
Bluetooth device. DN-300BR will automatically try to pair with a previously paired Bluetooth
device within range, if any.
•
Flashing quickly
(approximately
twice per second)
:
DN-300BR can be paired to any
available Bluetooth device.
•
Solidly lit:
DN-300BR is paired to a Bluetooth device.
See
Operation
to learn how to pair/unpair a Bluetooth device to/from DN-300BR.
4.
Pair Button:
Press this button briefly to make DN-300BR available for pairing to a nearby
Bluetooth device. Press and hold this button for 3 seconds to break any previous Bluetooth
connections and remove the last paired device from the memory of the Bluetooth module. See
Operation
for more information.
5.
Level Knob:
Turn this knob to adjust the output volume level (sent to the balanced and
unbalanced outputs).
Rear Panel
1.
BNC Antenna Terminal:
Connect the included
removable Bluetooth antenna
to this BNC
connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth
device. DN-300BR has a range of up to 100 feet (33 meters).
Note:
Make sure to attach only one antenna to either the front panel or rear panel Terminal at a
time. Using two antennae will negatively affect the performance of the Bluetooth receiver.
2.
Remote Pairing Connector
: Use the included 2-pin Euroblock connector to add a remote
pairing button (not included) to this connector.
3.
Outputs
(
Balanced XLR
)
:
These outputs send the audio from a paired Bluetooth device. Use
XLR cables to connect these outputs to your loudspeakers, mixer, etc. See
Setup
for more
information.
4.
Outputs
(
Unbalanced RCA
)
:
These outputs send the audio from a paired Bluetooth device. Use
standard RCA cables to connect these outputs to loudspeakers, mixer, etc. See
Setup
for more
information.
5.
AC Input:
Use the included power cable to connect this input to a power outlet. See
Setup
for
more information.
6.
Fuse:
If the fuse blows, replace it with a fuse of the same type. Using a fuse with an incorrect
rating can damage the unit and/or fuse.
1
2
3
4
5
1
2
3
4
5
6
