FRONT PANEL ASSY
Refer to
"DISASSEMBLY
1. FRONT PANEL ASSY"
and
"EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW : B)
DISPLAY PCB UNIT
(Ref. No. of EXPLODED VIEW : 6)
BD MECHA UNIT ASS'Y
Refer to
"DISASSEMBLY
2. BD MECHA UNIT ASSY"
and
"EXPLODED VIEW"
MAIN PCB UNIT ASSY
(Ref. No. of EXPLODED VIEW : A)
MAIN PCB UNIT ASS'Y
Refer to
"DISASSEMBLY
3. MAIN UNIT ASSY"
and
"EXPLODED VIEW"
MAIN PCB UNIT ASSY
(Ref. No. of EXPLODED VIEW : A)
POWER PCB UNIT ASS'Y
Refer to
"DISASSEMBLY
5. POWER PCB UNIT"
and
"EXPLODED VIEW"
POWER PCB UNIT
(Ref. No. of EXPLODED VIEW : 2)
IR PCB UNIT ASS'Y
Refer to
"DISASSEMBLY
4. IR PCB UNIT"
and
"EXPLODED VIEW"
IR PCB UNIT
(Ref. No. of EXPLODED VIEW : 2)
TOP COVER
9
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
About the photos used for "descriptions of the DISASSEMBLY" section
• The shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
•
Refer to the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.
The viewpoint of each photograph
(Shooting direction)
［
View from the top
］
Front side
Shooting direction: B
Shooting direction: D
Shooting direction: C
Shooting direction: A
