24
SERVICE MODE
1. Initial setting mode
1.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
1.2. procedure
b
Initialize the BD player when µcom, peripheral parts of µcom, or MAIN PCB. unit has been replaced in servicing.
b
All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) Turn on this model's power. "NO DISC" is displayed on the FL tube.
(2) Press the this model's
1
and
9
buttons simultaneously. "INITIALIZING" is displayed on the FL tube.
(3) The display on the FL tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.
2. Firmware version check mode
2.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
2.2. procedure
b
Front-end and Back-end and SYS com version check mode.
(1) Press the SETUP button on the remote controller to display the SETUP menu.
(2) Press remote controller "3265".
(3) The version is displayed on the TV screen as follows.
Select
Confirm
ENTER
Exit
SETUP
0
1
Fmt buda
Fmt buda
Reset
Factory Page
HQ 00003604,HF 00000000, MCU007
JVM CDCA_JVM100311_2586
Version
Loader: CV0017
8530
DVD Region Cod
BD Region Code
Reset Password
General Setting
Language
System
Ratings
Network
Others
Version
HQ 0000xxxx
Back-end version
Version
MCUxxx
SYS com version
Loader
：
4Fxxxx
Front-end version
