Denon DBP-2012UDCI, Service Manual, Page: 7 / 92

7
CAUTIONS IN SERVICING
Initializing BD player
Initialize the BD player when com, peripheral parts of com, or MAIN P.W.B. unit has been replaced in servicing.
1. Turn on this model's power. "NO DISC" is displayed on the FL tube.
2. Press the this model's
2
and DISC LAYER buttons simultaneously. "INITIALIZING" is displayed on the FL tube.
3. The display on the FL tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.
Service tools
Measuring Disc: CD/TCD-784
DVD/VT502 or TDV-520A
BD/ABD-520 or BLX-108
z Refer to "MEASURING METHOD AND WAVEFORMS".
When you repair the BD MECHA UNIT, you can use the following JIG.
Please order it from Denon Of
fi cial Service Distributor in your region if necessary.
Do not supply it : 2-Dimensional Bar Code Reader (DS6708 made by Symbol Co. etc.) : 1 Set
Do not supply it : 232C (TTL) – USB conversion jig (Model: DUT-06635 by GeeeTech): 1 Set
Part No. : 61205000300AS : 4P RE-PH CONN CORD (1000mm) : 1 Set
z Refer to "HOW TO REPLACE THE MECHA UNIT (TRAVERSE)".
Note: • If step 3 fails, start over from step 1.
• All user settings will be lost and the factory setting will be recovered after the set is initialized.
So make sure to note down your setting for beforehand restoring after the initialization.
ON/STANDBY
2 DISC LAYER