29
PROCEDURE FIRMWARE FOR UPGRADING T E VERSION OF T E
FIRMWARE
f
You can update by downloading the latest version from the Internet.
1. Upd te fro the Internet
1.1. prep r tion
(1) System re uirements
• Internet Connection by Broadband Circuit
• Modem
• Router
• Ethernet cable (CAT- or greater recommended)
(2) Setting
1.2. Chec in nd upd tin the r
re
Check if the latest firmware e ists. You can also check appro imately time re uired to complete an update.
(1) Press the SETUP button on the remote control to display the UI menu.
(2) Use the cursor buttons to select " eneral Setting" "System" "Firmware Update" "Update check".
(3) Press the ENTER button.
• The latest version of the firmware on the website is displayed.
• If the firmware on the website is latest, proceed to (4).
• If the latest firmware has been already installed, press the
8
button to return to SETUP menu.
(4) Use the Cursor buttons to select "Update", then press the ENTER button.
• When updating is completed, return to normal status about 20 seconds later.
C utions on Fir
re Upd te
• In order to update the firmware, you must have the correct system re uirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
• Once updating starts, normal operations on this unit cannot be performed until updating is completed. Also, setting
items of the UI menu of this unit or setting items of the image adjustment may be initiali ed.
Note down of the settings before updating, and set them again after updating.
Modem
Internet
Computer
LAN port Ethernet connector
ET ERNET
connector
Router
To WAN port
To LAN port
To LAN port