8
DISASSEMBLY
f
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
About the photos used for "descriptions of the DISASSEMBLY" section
• The shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
• Refer to the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.
The ie point of e ch photo r ph
Shootin direction
［
View from the top
］
Front side
Shooting direction: B
Shooting direction: D
Shooting direction: C
Shooting direction: A
TOP COVER
FRONT PANEL ASSY
Refer to
"DISASSEMBLY
1. FRONT PANEL ASSY"
and
"EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW : B)
DISPLAY PWB UNIT
(Ref. No. of EXPLODED VIEW : 6)
REMOTE PWB UNIT
Refer to
"DISASSEMBLY
3. REMOTE PWB UNIT"
and
"EXPLODED VIEW"
REMOTE PWB UNIT
(Ref. No. of EXPLODED VIEW : 3)
BD MAIN UNIT ASSY
Refer to
"DISASSEMBLY
2. BD MAIN UNIT ASSY"
and
"EXPLODED VIEW"
MAIN PWB UNIT ASSY
(Ref. No. of EXPLODED VIEW : A)
FAN
Refer to
"DISASSEMBLY
4. FAN"
and
"EXPLODED VIEW"
DC FAN
(Ref. No. of EXPLODED VIEW : 27)
POWER PWB UNIT
Refer to
"DISASSEMBLY
5. POWER PWB UNIT"
and
"EXPLODED VIEW"
POWER PWB UNIT
(Ref. No. of EXPLODED VIEW : 2)
