16
Connection
(1) Connect the PC and bar code reader.
(2) Connect the 232C (TTL) side 4P P connector of the USB - 232C (TTL) conversion jig to the MAIN PWB UNIT
(CON601) of the set.
(3) Connect the USB side of the USB - 232C (TTL) conversion jig to the PC.
Writin ne i ht pic up d t
• Barcode position of light pick-up unit
(1) Switch on the power on of the set before the BD MEC A UNIT ASSY is replaced.
(2) Decompress the D M ScanBarcode Rpower 2.16.60( ES460) MP function. ip folder and start the "Rpower.e e".
(3) A pop-up is displayed. Click "O ".
(4) Click "O ".
PC (USB)
へ
MAIN PWB UNIT
CON601
4P RE-P CONN CORD (1000mm)
umper pin : 3.3V
f
mark
USB - 232C(TTL) conversion sig
View from the bottom
2-Dimensional Bar Code
BD MEC A UNIT ASSY for replacement
(The 2-dimensional bar code can be photographed
with a digital camera, and the barcode data can be
converted with a 2-dimensional barcode reader.)
