Denon AVR-X2700H Owner'S Manual Download Page 18

Page: 18 / 283

Q3 Q4

QUICK SELECT buttons
With a single press of any of these buttons, you can call up various

settings you’ve registered to each button such as the input source,

volume level and sound mode settings. (

p. 135)

Headphones jack (PHONES)
This is used to connect headphones.

When the headphones are plugged into this jack, audio will no longer

be output from the connected speakers or from the PRE OUT

connectors.

NOTE

To prevent hearing loss, do not raise the volume level excessively when using

headphones.

SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.

(

p. 186)

USB port (

)

This is used to connect USB storages (such as USB memory devices).

Summary of Contents for AVR-X2700H



























































































































































































































































































Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands

Denon AVR-X2700H, Owner'S Manual

Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands