Denon AVR-X2700H Owner'S Manual Download Page 80

Page: 80 / 283

Listening to audio on Bluetooth

headphones

Set “Transmitter” to “On” from the “General” -

“Bluetooth Transmitter” setting in the menu.

(

p. 216)

Select “Output Mode”, and set audio output method.

Blu Speakers

(Default):

Audio is output to Bluetooth

headphones and main zone speakers.
This simultaneous output is suitable for

family movie night and other group

activities.

Bluetooth Only:

Audio is output to Bluetooth

headphones only.
This is suitable for listening to music or

watching movies by yourself at night

when you need to keep quiet.

Enter pairing mode on the Bluetooth headphones you

want to connect to this unit.

Select “Device List” and select the name of the

Bluetooth headphones from the device list.

Adjust the volume of connected Bluetooth headphones

after the connection is completed.

“Output Mode” can also be set from “Bluetooth Transmitter” in the option menu.

A2DP profile-compatible Bluetooth speakers can be connected following the same

steps used to connect Bluetooth headphones.

NOTE

Bluetooth headphones volume cannot be adjusted from this unit. Adjust volume of

your Bluetooth headphones.

Stereo mode is fixed as the sound mode when using Bluetooth headphones. Any

sound modes and other audio settings are not reflected in audio output on

Bluetooth headphones.

Audio settings, sound modes and All Zone Stereo mode are not available while

using Bluetooth headphones and “Output Mode” is set to “Bluetooth Only”.

Audio may be delayed when sent over Bluetooth.

Bluetooth headphones cannot be connected when use a Bluetooth input source in

any zone.

Furthermore, selecting a Bluetooth input source in any zone will terminate the

connection between this unit and Bluetooth headphones.

Bluetooth headphones cannot be connected when this unit is grouped in the

HEOS App.

CAUTION:

Using Bluetooth headphones without a volume adjustment

function

In order to avoid hearing loss, do not connect Bluetooth headphones

that lack volume adjustment functionality.

Bluetooth headphone volume may be unexpectedly loud when this

unit connects to Bluetooth headphones.

Bluetooth headphone volume cannot be adjusted from this unit.

Summary of Contents for AVR-X2700H



























































































































































































































































































Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands

Denon AVR-X2700H, Owner'S Manual

Search results

Summary of Contents for AVR-X2700H

Reviews:

Related manuals for AVR-X2700H

Brands by name

Popular brands