CAUTION IN SERVICING (AVR-X2200W)
Initializing This Unit
Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the digital PCB.
1. Press the power button to turn off the power.
2. While holding down buttons "
ZONE2 SOURCE
" and "
DIMMER
" simultaneously, press the power button to turn on
the power.
3. Release the buttons after confirming that the display flashes at 1-second intervals.
＊ The unit is initialized.
NOTE
：
• If the unit fails to enter the service mode in step 3, repeat the procedure from step 1.
• Initializing the device restores the customized settings to the factory settings. Write down your settings in advance and
reconfigure the settings after initialization.
AVR-X2200W
JIG FOR SERVICING
Use the following jigs (extension cable kit) when repairing the PCBs.
Order with your dealer for the jigs your dealer if necessary.
8U-110084S
:
EXTENSION UNIT KIT
:
1Sets
8U-110136S
:
EXTENSION UNIT KIT
:
1Sets
(See
page 57
)
MASTER VOLUME
SOURCE SELECT
ONLINE
MEDIA
PLAYER
Blu-ray
CB L /S A T
3
2
1
4
ZONE2
ON/OFF
ZONE2
SOURCE
DIMMER
S T A T U S
TUNER
PRESET CH
SETUP MIC
AUX 1 - HDMI
PHONES
QUICK SELECT
DIMMER
X
ZONE2 SOURCE
13
