CAUTION IN SERVICING (AVR-S910W)
Initializing This Unit
Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the digital PCB.
1. Press the power button to turn off the power.
2. While holding down buttons "
TUNER PRESET CH +
" and "
TUNE -
" simultaneously, press the power button to turn
on the power.
3. Release the buttons after confirming that the display flashes at 1-second intervals.
＊ The unit is initialized.
NOTE
：
• If the unit fails to enter the service mode in step 3, repeat the procedure from step 1.
• Initializing the device restores the customized settings to the factory settings. Write down your settings in advance and
reconfigure the settings after initialization.
AVR-S910W
JIG FOR SERVICING
Use the following jigs (extension cable kit) when repairing the PCBs.
Order with your dealer for the jigs your dealer if necessary.
8U-110084S
:
EXTENSION UNIT KIT
:
1Sets
8U-110136S
:
EXTENSION UNIT KIT
:
1Sets
(See
page 57
)
SETUP MIC
AUX 1 - HDMI
MASTER VOLUME
BAND
MODE
DIMMER
STATUS
TUNE
ZONE2 ON/OFF
ZONE2 SOURCE
TUNER
PRESET CH
PHONES
MOVIE
INFO
MUSIC
GAME
PURE
CBL/SAT
Blu-ray
2
3
4
ONLINE
1
QUICK SELECT
SOUND MODE
GAME
SOURCE SELECT
TUNING
－
X
TUNER PRESET CH +
14
