![background image](http://html1.mh-extra.com/html/denon/avr-4311/avr-4311_owners-manual_2482752113.webp)
109
Basic version
Simple version
Information
ENGLISH
Advanced version
Erasing the code by each equipment input source
1
Press and hold
POWER ON
and
ZONE/DEVICE ON
for at least 3
seconds.
“SETUP” flashes twice on the remote
control unit.
2
Use
ui
to display “RESET” on
the remote control unit and press
ENTER
.
3
When “LEARN” appears on the
remote control unit, press
ENTER
.
4
When “MODE?” appears on the
remote control unit, press the
input source select button of the
AV equipment that you want to
erase.
5
When “ALL?” appears, press
ENTER
.
“RESET” flashes four times on the remote control unit and the
normal operation mode is restored.
Operating the main remote control unit
Operating macro function
• When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed
easily just by pressing the
MACRO
button.
• This device can remember up to 3 macro functions.
• Each macro can record a maximum of 18 steps.
[Example]
All system power on
q
Turn the TV’s power on
↓
w
Turn this unit’s power on
↓
e
Switch this unit’s input source to DVD
↓
r
Turn the DVD’s power on
n
Recording macro operations
1
Press and hold
POWER ON
and
ZONE/DEVICE ON
for at least 3 seconds.
“SETUP” flashes twice on the remote control unit.
2
Use
ui
to display “MACRO”
on the remote control unit and
press
ENTER
.
3
When “MCNo? ” appears on the
remote control unit, press the
QUICK SELECT
button that you
want to store.
Button
Macro number
QUICK SELECT 1
MACRO-1
QUICK SELECT 2
MACRO-2
QUICK SELECT 3
MACRO-3
4
Press the buttons to be stored one
by one.
• The step number for the storing procedure and mode are alternately
displayed on the remote control unit.
• You cannot store the macros for the
ZONE SELECT
,
SOURCE
SELECT
and
BACK LIGHT
buttons.
5
Press
MACRO
to exit the macro function.
“SET” flashes four times on the remote control unit and the
normal operation mode is restored.
n
Adjusting the interval time of macro operations
transmitting
The macro operation transmission interval can be adjusted.
• The factory setting is “0.5 sec”.
1
Press and hold
POWER ON
and
ZONE/DEVICE ON
for at least 3
seconds.
“SETUP” flashes twice on the remote
control unit.
2
Use
ui
to display “MACRO”
on the remote control unit and
press
ENTER
.
3
When “MCNo?” appears on the
remote control unit, press the
QUICK SELECT
button that you
want to set.
Button
Macro number
QUICK SELECT 1
MACRO-1
QUICK SELECT 2
MACRO-2
QUICK SELECT 3
MACRO-3
4
Press
MACRO
many times to set the macro operation
transmission interval and press
ENTER
.
“SET” flashes four times on the remote control unit and the
normal operation mode is restored.
Remote control unit display
Time values that you can
set
0.25
0.25 sec
0.50
0.5 sec
0.75
0.75 sec
1.00
1 sec
1.25
1.25 sec
1.AVR4311E2_ENG_6th_0810.indd 109
2010/08/12 10:12:21