Denon AVR-2313, Service Manual

Page: 66 / 230

66
Error
Code
Details of Error code Display Coping strategies
5C
DSP, PLD etc. failed to receive
firmware for rewriting sent from
DM860A (when timed out).
U p d a t i n g f a i l 5 C
Turn off and on the power.
Updating starts automatically.
5D
DSP, PLD etc. failed to receive
firmware for rewriting sent from
DM860A (when an error occurred).
U p d a t i n g f a i l 5 D
Turn off and on the power.
Updating starts automatically.
5E
Data in firmware such as DSP and
PLD for rewriting sent from DM860A
was invalid (when a Check Sum error
occurred).
U p d a t i n g f a i l 5 E
Turn off and on the power.
Updating starts automatically.
5F
Invalid data in firmware such as
DSP and PLD for rewriting sent from
DM860A was invalid (invalid data was
received).
U p d a t i n g f a i l 5 F
Turn off and on the power.
Updating starts automatically.
60
NACK was received when "P"
command sent to DSP, PLD etc.
U p d a t i n g f a i l 6 0
Turn off and on the power.
Updating starts automatically.
61
NACK was received when "I"
command sent to DSP, PLD etc.
U p d a t e C h e c k N G 6 1
Turn off and on the power.
Updating starts automatically.
80
Acquisition of serial flash data failed
before serial flash was deleted.
U p d a t i n g f a i l 8 0
Turn off and on the power.
Updating starts automatically.
81
Deleting data failed before serial flash
was rewritten.
U p d a t i n g f a i l 8 1
Turn off and on the power.
Updating starts automatically.
82
Receiving firmware for rewriting serial
flash sent by DM860A failed (when
timed out).
U p d a t i n g f a i l 8 2
Turn off and on the power.
Updating starts automatically.
83
Receiving firmware for rewriting serial
flash sent by DM860A failed (when an
error).
U p d a t i n g f a i l 8 3
Turn off and on the power.
Updating starts automatically.
84
Receiving firmware for rewriting serial
flash sent by DM860A failed (when a
Check Sum error).
U p d a t i n g f a i l 8 4
Turn off and on the power.
Updating starts automatically.
85
Receiving firmware for rewriting serial
flash sent by DM860A failed (when
invalid data was received).
U p d a t i n g f a i l 8 5
Turn off and on the power.
Updating starts automatically.
86
The data verification was invalid after
serial flash was rewritten.
U p d a t i n g f a i l 8 6
Turn off and on the power.
Updating starts automatically.
A0
Acquisition of (Application Mode) IP
address failed before DM860A was
rewritten (AutoIP).
C o n n e c t i o n F a i l A 0
Check the network connection.
Carry out the update in an environment
that has little network load.
A1
Acquisition of (Application Mode) IP
address failed before DM860A was
rewritten (when timed out).
C o n n e c t i o n F a i l A 1
Check the network connection.
Carry out the update in an environment
that has little network load.
A2
Invalid login via DPMS access
was notified when DM860A related
firmware was rewritten (Application
Mode).
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an environment
that has little network load.