Denon AVR-2313, Service Manual

Page: 29 / 230

29
3. Service Related Selection mode
3.1. Behavior specifications
In this mode, you can switch between the Diagnostic mode (SERVICE CHECK) and the Displaying the protection mode
(PROTECTION) and the 232C clear mode (RS232C RESET).
3.2. Starting up
Press the "Power operation (
X
)" button to turn on power while pressing the "ZONE2/REC SOURCE", "DIMMER" and
"STATUS" buttons.
Press the "TUNER PRESET CH +" button to select the mode and press the "STATUS" button to restart the set and make
the setting take effect.
q
FLD
1 . S E R V I C E C H E C K
This mode is used for confirming the Video and Audio (signal)
paths. (Diagnostic mode)
The signal paths of the set can be easily confirmed after repair.
w
FLD
2 . P R O T E C T I O N
The protection history can be checked.
e
FLD
3 . R S 2 3 2 C R E S E T
The 232C standby mode is changed to the Normal standby mode.
3.3. Canceling diagnostic mode
Turn off the power by pressing the "Power operation (
X
)" button.